BabyLove BL4300/2010 Instruction Book - page 12
23
22
HOW TO USE WITH A CHILD HARNESS
HOW TO USE WITH A CHILD HARNESS
USING LAP SASH SEATBELT
Thread the converted lap-sash seat belt
through the harness strap loops as shown.
Tighten the converted Lap belt over the
child's hips and thighs then remove the
slack from the Child Harness so that the
Lap belt is not lifted off the thighs.
Converted
lap-sash
seat belt.
Slide the Gated Slide
so that it is close
to the child but not
touching the child.
Lower
Harness
Strap
Loops.
3
6
1
2
5
4
7
8
Child Harness Guide (if fitted)
USING LAP ONLY SEATBELT
Thread the lap seat belt through either
the Upper Harness Strap Loops or Lower
Harness Strap Loops.
Tighten the Lap belt over the child's hips
and thighs then remove the slack from the
Child Harness so that the Lap belt is not
lifted off the thighs.
DO NOT LEAVE CHILDREN
UNATTENDED IN THE CAR.
:
Lap belt or
converted
lap-sash
seat belt.
Thread the harness through
any guides on the booster
seat (if fitted).
Engage seat belt
buckle and tongue.
USING THE BOOSTER SEAT WITH A CHILD HARNESS WITH A
FRONT ADJUSTER
The Babylove EzyGo harness Series BL220/2010 and Safe-n-Sound Protecta PLUS harness Series
220/2010 child harnesses include an adjuster in the front of the harness. The harness may be used
with either a lap only seat belt or a lap-sash seat belt.
1.
Attachment Clip
2.
Car's Anchor Fitting
3.
Right Hand Harness Straps
4.
Storage strap
5.
Adjuster cover
6.
Right Hand Harness Strap Loop
7.
Cross Strap Loop
8.
Cross Strap
Pull to remove
slack
The lap portion of the belt must be adjusted firmly first, and then the harness, so that the belt is not
lifted off the child’s lap when the harness is adjusted. The shoulder strap does not need to be tight.
: