BabyLove BL4300/2010 Instruction Book - page 13
2
1
3
Adjuster
25
24
HOW TO USE WITH A CHILD HARNESS
HOW TO USE WITH A CHILD HARNESS
Fully press adjuster button (1) while
pulling the Upper Anchorage Strap
(2) to lengthen.
Adjuster
Pull Adjuster
strap to
remove slack
A. Lengthen the shoulder strap by pressing the
adjuster button (1) and pulling the strap (2).
B. Thread the anchorage strap through the child
harness guide at the top of the seat. Attach
the attachment clip to the car's anchor
fitting (see illustration).
An adjustable extension strap supplied
with the Child Harness may be required for
hatchbacks or wagons.
C. With the child seated, place each of the harness straps
through the guide on the top of the seat and then over each
shoulder.
D. Feed the right hand strap (loop end) into the cross strap loop
to connect the two sides.
E. Feed the adult belt (lap belt or converted lap/sash) through
the harness loops, ensuring that the cross strap loop does
not disconnect. Also ensure there are no twists in the
harness, cross strap and seat belt.
Converted
lap-sash
seat belt.
Lap belt.
Thread the converted lap-sash seat belt or lap seat belt through the
harness strap loops as shown below.
Harness
strap
loops.
Attachment Clip
B
Anchor Fitting