BabyLove BL4300/2010 Instruction Book - page 9
16
17
HOW TO USE WITH A CHILD HARNESS
HOW TO USE WITH A CHILD HARNESS
Faces
towards
Child
Inner
Strap
Outer
Strap
C. Repeat previous step A for the other slot in the Gated Slide.
B. The two straps should slide freely in the Gated Slide slot.
D. Feed the straps through the Gated Slide to remove any slack. This
has now converted the lap-sash seat belt so it will act like a lap
only seat belt.
NOTE: TO ENSURE CORRECT CONVERSION OF LAP-SASH SEAT BELT TO LAP SEAT BELT FOLLOW
THESE STEPS.
IMPORTANT:
The Gated Slide must be removed from the seat belt if the booster seat and child harness are no longer
used in the car so that other users can use the seat belt as a lap-sash seat belt.
A seat belt extender should not be used if the seat belt is not long enough to secure the child. If a seat
belt extender is used then the buckle must not be in contact with the child.
Hollow side
towards child.
Strap
portion
Lap portion
Loop on top
Hollow side
towards the child
A. Hold the lap and sash straps together and fold as shown.
Slide the inner strap into the Gated Slide followed by the outer
strap.
IMPORTANT:
Face the hollow side of the Gated Slide towards the child. Do not
use Gated Slide for any other purpose.