BabyLove BL4300/2010 Instruction Book - page 6
ALWAYS
USE
THIS
SASH
GUIDE
11
10
HOW TO SETUP
HOW TO SETUP
Sash
guide
B. Align the sash guide strap with the chosen
slot so that the slot is above the child's
shoulder. Thread the Sash guide through the
slot in the seat cover that corresponds to
the seatbelt configuration. Then refit the seat
cover to the restraint. For smaller children
use the lowest slot.
Thread the sash
guide through the
chosen slot in
the seat cover.
ADJUSTING THE SASH GUIDE
POSITION
A. Unzip the trim at the back of the booster
seat at the top rear of the restraint, then pull
the cover forward to reveal the Sash guide
which is attached to a strap at the back of
the seat cover.
Hold the Sash
Guide and pull
strap to shorten
Sash
guide
slots
Sash
guide
slots
To Lengthen
To Shorten
Hold the strap,
rotate and pull
the sash guide
to lengthen
The Sash Guide should be used to correctly position the
sash portion of the lap-sash seat belt across the child's
shoulder and chest.
Feed the adjusting strap into the slot on the cover that
is just above the child's shoulder. Adjust the height of
the Sash Guide so that the guide is above the child's
shoulder.