Instruction manual important – keep for future reference read the instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions..
• do not place items on the hood/canopy, it may damage the vehicle and/or render it unsafe. 2 contents • rubber tyres can leave marks on some surfaces. The tyres can react with some surfaces (vinyl floor coverings, carpets etc.) and cause stains. Always stand the stroller on a protective surface ind...
3 14 • always use the rain cover in inclement weather. Fitting the stroller rain cover important safety information place the rain cover over the stroller; the rain cover needs the stroller hood to be fitted to support the rain cover. Fasten the velcro strips at the front of the rain cover around th...
4 primary features flip out canopy the front section of the hood can be flipped out or folded back into the main part of the hood depending choice. To flip out the canopy hold the front part of the canopy and pull forwards. To fold the canopy away push it back into the hood and smooth the fabric. Zi...
Fitting and removing the rear wheels hold the rear wheel and insert the rear wheel axle stub into the hole in the rear axle. Push in completely until you hear a click. Pull the wheel to check it is locked on. To remove the rear wheel push in and hold the rear wheel quick release lever (on the rear a...
Opening the chassis release the chassis locking clip by pushing it outwards and pull up on the handle. The chassis will start to open and will click when the handle tube is locked in line with the lower tube. Clicks and locks into position. Check that the car seat is secure and locked by pulling up ...
Car seat options folding the chassis with the seat unit fitted the oyster can be fitted with several car seats. Always check with your retailer that you have the correct car seat adaptors (if required). The oyster can be folded with the seat unit fitted facing either forwards or backwards. To fold t...
Fitting and removing the bumper bar fitting the oyster car seat (model lb321) to the chassis push the ends of the bumper bar into the corresponding slots on the seat unit until the bumper bar locks into position. To remove the bumper bar, press in the bumper bar release button on the side of the sea...
