Baijia BJ-05 Operation Manual - page 25
19
Operation
Self-
checking
Feeding
Operation
Button
Function
Counting
Mode
Outer
Display
Detection
Sensitivity
Adjustment
5.5.2 Magnetic Sensitivity Adjustment(For UVMG model)
Press the button for once with showing " " in the batch display(refer to Fig. 9)
" " means magnetic detection, " "means low level sensitivity. If you want to change
the sensitivity, please press switch ,the batch display shows" " " means high
level . The unit will save the setting after 1.5 seconds and enter the stand-by state.
5.5.3 Width Sensitivity Adjustment(Optional)
Press the
button for once with showing " " in the batch display(refer to Fig.10)
" " means width detection , " " means the width is above 4mm, it means high level.
If you want to change the sensitivity, please press switch, the relative" " and
" " shown in the batch display. " "means width is above 5 mm, it means the middle
level. " "means width is above 6 mm, it means the low level. The unit will save the
setting after 1.5 seconds and enter the stand-by state.
MG
MG
Fig.9
SIZE
SIZE