BaltGaz LUX User Manual - page 3
5
TABLE OF CONTENTS
1.
SAFETY MEASURES
INDICATION…………………………………………………………………………………………..………...3
2. DESCRIPTION AND OPERATION OF THE
APPLIANCE……………………………………………………………………………………………….…..... 3
2.1. Appliance’s purpose……………………………………………………………………………………….….3
2.2. Technical characteristics….………………………………………………………………….…………..……4
2.3. Supply package…………………………………………………………………………………….…
5
2.4. Overall and connection dimensions of the appliance………………….…………………………….....
5
3. USAGE OF THE APPLIANCE…………………………………………………………………….……..…..7
3.1. Putting the appliance into
operation……………….…………………………………………………………………………………..….…..7
3.2. Water temperature regulation…………………………………..……………………………………….……7
3.3. Switching the appliance
off…………………………………………………………………………………………………………….…..8
3.4. Replacing the power
element………………………………………………………………………….………………………….…..….8
3.5. Protection from freezing…………………………………………………………………….………..
9
3.6. Actions in emergency
situations……………………………………………………………………….………………………….….......9
4. APPLIANCE TREATMENT.………………………………………………………………………..……...….9
4.1.Examination……………………………………………………………………………….………….…
9
4.2.Treatment…………………………………………………………………………………………...…..
9
5. RULES OF TRANSPORTATION AND
STORAGE……………………………………………….…………………………………………….…….…..10
6. SAFETY MEASURES……………………………………………………………………….…………
10
7. APPLIANCE INSTALLATION…………………………………………………………...……….……
10
7.1.Place and scheme of installation……………………………………………………………………………. 10
7.2. Mounting the appliance……………………………………………………………………………..………..11
7.3. Connecting the appliance to the water supply system ………………………………………..………..…..12
7.4. Connecting the appliance to the gas
system……………………………………………………………………………………………………………..12
7.5. Connecting the appliance to the LPG cylinder……………………………………………..………….
12
7.6. Rules of flexible hoses installation…………………………………………………………………..……. 13
7.7. Connecting the appliance to the exhaust flue…………………………………………………………..
14
7.8. Installation of the power
element……………………………………………………………………………………………………..……..15
7.9. Checking the appliance…………………………………………………………………………………
15
7.10. Rendering the appliance to another type and pressure of gas………………………………………...…….15
8. CONSTRUCTION AND OPERATION CONTROL OF THE
APPLIANCE……………………………………………………………….………………………………
16
8.1. Construction of the
appliance…………………………………………………………………………………………………...……..15
8.2. Operation of the appliance………………………………………………………………………………….. 19
9. POSSIBLE FAILURES AND METHODS OF THEIR
ELIMINATION……………………………………………………………….……………………….……
22
10. GENERAL INSTRUCTIONS…………………………………………..……………………...……...
25
11. HANDING THE APPLIANCE OVER TO THE
CUSTOMER…………………………………………………………………………………………………… 25
12. TECHNICAL SERVICE…………………………………………………………..………………………....26
12.1. Cleaning the main and ignition
burner…………………………………………………………………….…………………………...…………..26
12.2. Cleaning the heat exchanger……………………………………………………………………………….. 26