BandLuxe E580 Series Installation Manual - Location and Cable Wiring
11
Important Installation Considerations
Before installing the outdoor CPE, consider the appropriate location,
clearance, and device orientation.
Location and Cable wiring
Consult your Service Provider to find the best location and angle for
getting the strongest signal from the base station.
Mount the CPE at the highest possible location with a clear view of the
base station signal source. Buildings or other obstructions will affect the
quality of the signal you receive.
Keep the best distance as possible from other devices that may cause
interference.
Check if you can route the cable through the available ventilation holes
to avoid unnecessary drilling and waterproofing the wall.
Disconnect the power cord first before mounting the CPE.
Otherwise this may result in personal injury due to electric shock.
Mounting
Choose a solid wall/ground to mount the CPE.
Mount on a wall/pole that can sustain the CPE dimensions and weight.
Mount upright on a vertical surface.
Appendix 2.
Do a walking test around the house to find the best spot with the
strongest signal if you don’t obtain related information from your
Service Provider.
1
1