Bar aid 400 Installation And Operation Instruction Manual - 3 Controls
6
1618-A-01-09
dE
GB
F
nl
➀
Machine on / oFF
Pushing this button switches the machine on.
In case of operating error or faults, it is possible to switch-off the machine
immediately without the drain cycle, by pushing this button again.
after switch off, the machine is not voltage free!
➁
start button
By pushing this button the wash cycle will be started.
Furthermore the button illuminates to indicate the mode of the machine:
GREEn
GREEn
(flashing)
(permanent)
= Machine fills and starts heating
Wash cycle is running
Machine draining / switch-off
= Machine is ready for operation
➂
drain button
By pushing and holding ( seconds) this button, the drain and self cleaning
cycle starts. At the end of the cycle, the machine switches off automatically.
after switch off, the machine is not voltage free!
➃
program button
By pushing this button, it is possible to select between two preset
programs.
The program no. (e.g. p02) will be shown in the Display
➅
.
➄
display
e.g. temperature indication wash (°C) (see chapter 6).
➅
display
e.g. temperature indication Rinse (°C) (see chapter 6).
➆
salt required
Indicating the need for regeneration salt to be added.
(Only with built-in softener.)
➇
service indicator
Indicating, that the machine has a fault (see chapter 1).
3 contRols
6
8
5
2
4
7
1
3