Barazza 1PLBC3IDN Installation And Use Manual - page 24
24
8) BLOCCO COMANDI
Questa funzione può essere attivata solo se le zone
di cottura non sono selezionate.
E’ possibile bloccare i comandi per evitare il rischio di
modifiche non intenzionali alle regolazioni del piano
(bambini, operazioni di pulizia, ecc.).
Per attivare il “blocco comandi”, premere contempo-
raneamente, il tasto
“C”
(in basso a destra) e il tasto
“D”
, poi nuovamente il tasto
“C”
; i 2 led mostreranno
il simbolo
“L”
per segnalare l’avvenuto blocco dei
comandi (fig.17).
Per sbloccare temporaneamente i comandi e tornare
ad agire sulle regolazioni (es. interrompere la cottura)
è necessario premere contemporaneamente il tasto
“C”
(in basso a destra) e il tasto
“D”
; i 2 led mostreran-
no il simbolo
“0”
lampeggiante e sarà possibile agire
sulle regolazioni.
Quando il blocco dei comandi è attivo è comunque
possibile spegnere il piano di cottura.
In questo caso il blocco comandi rimane attivo anche
alla riaccesione del piano.
Per disattivare definitivamente il “blocco dei coman-
di”, è necessario premere contemporaneamente il
tasto
“C”
(in basso a destra) e il tasto
“D”
, poi nuova-
mente il tasto
“D”
.
Il piano cottura si spegnerà ed alla riaccensione il
blocco comandi non sarà più inserito.
8) CONTROL PANEL LOCK
This function is can be activated only if the cooking
zones aren’t selected.
It is possible to lock the controls to prevent the risk of
unintentional modification of the settings (children,
cleaning, etc.).
To activate the
“control panel lock”, press keys “C”
(bottom right) and
“D” at the same time, then key “C”
once again; the 2 LED lights will display the symbol
“L”
to indicate that the control panel lock has been imple-
mented
(fig.17).
To temporarily unlock the commands and return to
making adjustments (e.g. interrupting cooking), you
must press keys “
C” (bottom right) and “D” at the
same time; the 2 LED lights will display the flashing
symbol
“0” indicating that it is now possible to make
adjustments.
It is possible to switch off the hob when the control panel
lock is active.
In such a case, the control panel lock remains active
when the hob is turned back on.
To unlock the
“control panel lock” permanently, you
must press keys
“C” (bottom right) and “D” at the same
time, then key
“D” once again.
The hob will switch itself off and upon switching back on,
the control panel lock will no longer be active.
24
24
1
C
D
2
C
G
G
3
C
D
4
C
G
G
17