Barco CINE 6 Installation Manual - Installation Adjustments
Installation Adjustments
R5975819.05 BARCO CINE 6 21112002 ____________________________________________________________________________ 7-1
INSTALLATION ADJUSTMENTS
Entering the adjustment mode
Press ADJUST to enter the adjustment mode.
Random Access
Adjustment
Guided
Adjustment
Installation
(only for qualified
technician)
Service
Overview flow chart installation mode.
7
MAIN MENU
Image Control
Function Keys
Service Menus
Select with or
then
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following service menus are
reserved to, and to be performed
only by qualified personnel !
If qualified, press
continue, or if not,
return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then
This menu is displayed in
green. After ENTER is
pressed, only the green raster
is displayed and the control
disc may be used to center the
raster on the CRT surface. This
menu is also displayed, once in
red and once in blue.
Installation
Optical Lens
Focusing
CRT Projection
Angle Adjustment
Raster Centering
Electrical
Focusing
This menu is repeated
3 times, first in green,
then in red and then in
blue
Screen Size
Calculator