Barco PreCa 1280i Networking Manual - page 11
11
560425 BARCO network (E)
Storing the Loaded Image
1
Display the menu.
Right-click on the image, and a context menu is dis-
played. Choose “Save As” from the menu.
Note
• With some browser software, the latest image at
the time when you click on “Save As” is saved,
which may be different from that on the preview
display.
2
Specify a filename and save.
Type a filename, then left-click on “Save.”
Right-clicking on the image
displays a context menu.
Multiple window system
displays the last eight updated preview images in addition to the current image being
captured by this unit.
Items that can be set/adjusted on the Web screen
L
Light ON/OFF
Selects “Upper lamps on,” “Lower lamps off,” and “Both
off” in the sequence.
L
Auto Focus
Turns on/off the auto-focus function.
L
Focus-Near/Focus-Far
For fine-adjustment of the focus. Left-click repeatedly
on either “Focus-Near” or “Focus-Far.”
L
Zoom-OUT/Zoom-IN
Zoom-OUT: To widen the area to be captured
Zoom-IN: To enlarge the image
L
AE ON/OFF
Turns on/off the auto-iris function.
L
Iris +/-
For fine-adjustment of the iris. Left-click repeatedly on
either “-” or “+.”
L
SXGA/XGA
Switches the output mode.
L
White Balance
Turns on/off the white-balance function.
L
TONE
Selects “Natural,” “Linear1,” “Document,” “Linear2,” and
“Picture” in sequence.
L
Reverse
Selects “Normal,” “Nega,” and “BlueBack” in sequence.
L
T-GAIN+/-, R-GAIN+/-, G-GAIN+/-, B-GAIN+/-
To adjust the colouring.
Each time you click on “+” or “-,” the corresponding
setting changes in the range of 50 to 150.
L
Sharpness +/-
For contour adjustment.
For details on these items, refer to pages 24 to 28 of the User’s
Manual.
Checking the transition of preview display
If the eight-image display area is not seen, scroll the
display.
• The preview displays are updated each time a new image is
loaded.
• While the preview display is not updated eight times after displaying
the Web screen, only the available images are displayed.
Note
• The last eight updated images displayed by Multiple window
system cannot be loaded onto the PC.
Folder where the image file is to be saved.
Click here.
Enter the filename here.
**BARCO network(E)
2001.1.16, 2:15 PM
11