Barco PreCa 1280i Networking Manual - Using The Unit In A Network
2
560425 BARCO network (E)
Using the Unit in a Network
When connected to a network, this unit can send images to distant locations, enabling presentation in a new style.
Features
• Conforming to Ethernet (10BASE-T), the unit can be directly connected to a LAN or Internet line without using a PC.
• If you use a Web browser on a computer in the connected network, images captured with this unit can be displayed and
even downloaded. No special driver software is required.
• Storing images captured with this unit as files in a server via a LAN, you can check the images from a domestic PC any
time you want.
• The Enable Control function permits you to operate this unit from a PC (see pages 10 and 11).
• The last eight images can be seen at a glance in "Multiple window system" on the Web screen.
Conference room A
Conference room B
Projector
Projector
PC
PC
PC
PC
Monitor
Connected to a LAN
To conference room
C, D, and so on, or a
server
: LAN connection
: RGB connection
: Signal flow
The above figure shows an example of viewing an
image captured by the
in conference
room A shown simultaneously in conference room B.
The image can be seen even if there is no
in conference room B.
Operational environments
OS: Windows 95/98
Software: Internet Explorer 5.0 or higher or Netscape Communicator 4.5 or higher
Memory: 64MB or more
Caution
• The size of an image captured with this unit may be as large as 3.5MB (for a full-sized BMP). To send such mass data via
a network, consult the administrator of your network.
• Do NOT perform any network operation while this unit is accessing a PC card (with the PC card indicator lit in green).
I
Image captured by
the
in
conference room A
**BARCO network(E)
2001.1.16, 2:15 PM
2