Barco R9002240 Installation Manual - Safety Instructions

Safety Instructions

1-1

5975698 BARCOVISION 1609S 220198

1

WARNING

TO PREVENT FIRE OR ELECTRICAL SHOCK

HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE

FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)

This equipment has been tested and found to comply with the limits

of a class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment.  This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio commu-

nications.  Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required

to correct the interference at his own expense.

Instructions to the user :

If this equipment does cause interference to radio or television

reception, the user may try to correct the interference by one or more

of the following measures :

- Re-orientation of the receiving antenna for the radio or television.

- Relocate the equipment with respect to the receiver.

- Plug the equipment into a different outlet so that the equipment and

receiver are on different branch circuits.

- Fasten cables connectors to the equipment by mounting screws.

Note :

The use of shielded cables is required to comply within the limits of

Part 15 of FCC rules and EN55022.

* All the safety and operating instructions should be read before using

this unit.

* The safety and operating instructions manual should be retained for

future reference.

* All warnings on the equipment and in the documentation manuals

should be adhered to.

* All instructions for operating and use of this equipment must be

followed precisely.

On safety

1. This product should be operated from an  AC power source.

This projector may be connected to an IT-power system.

Operating AC power voltage of the projector:

BARCOVISION 1609s

Art.No. R9002240 (

230V AC)

Art. No R9002249 

(120V AC)

Consult your dealer to switch over from 230Vac to 120 Vac or from

120Vac to 230 Vac.

If you are not sure of the type of AC power available, consult your

dealer or local power company.

2. This product is equipped with a 3-wire grounding plug, a plug

having a third (grounding) pin. This plug will only fit into a grounding-

type power outlet. This is a safety feature. If you are unable to insert

the plug into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the purpose of the grounding-type plug.

SAFETY INSTRUCTIONS

Notice on Safety

This equipment is built in accordance with the requirements of the

international safety standards EN60950, UL 1950 and CSA C22.2

No.950, which are the safety standards of information technology

equipment including electrical business equipment.

These safety standards impose important requirements on the use of

safety critical components, materials and isolation, in order to protect

the user or operator against risk of electric shock and energy  hazard,

and having access to live parts.

Safety standards also impose limits to the internal and external

temperature rises, radiation levels, mechanical stability and strength,

enclosure construction and protection against the risk of fire.

Simulated single fault condition testing ensures the safety of the

equipment to the user even when the equipment's normal operation

fails.

INSTALLATION INSTRUCTIONS

Before operating this equipment please read this manual

thoroughly, and retain it for future reference.

Installation and preliminary adjustments should be performed

by qualified BARCO personnel or by authorized BARCO

service dealers.

OWNER’S RECORD

The part number and serial number are located at the back side of the

projector. Record these numbers in the spaces provided below. Refer

to them whenever you call upon your BARCO dealer regarding this

product.

PART NUMBER :

SER. NUMBER :

DEALER :

The lightning flash with an arrowhead within a

triangle is intended to tell the user that parts

inside this product may cause a risk of electrical

shock to persons.

The exclamation point within a triangle is in-

tended to tell the user that important operating

and/or servicing instructions are included in the

technical documentation for this equipment.