Barco Vision 708 9002357 Installation Manual - page 22
Installation Adjustments
7-2
5976026A BARCOVISION 708 200499
Overview flow chart installation mode.
Installation mode start up
It will be necessary to perform several mechanical adjustments while
in the installation mode. Remove the top cover in order to gain access
to the adjustment points (see Access to controls).
Two possible ways to enter the installation mode :
a) Using the RCU.
Press the ADJUST key.
The projector displays the path selection menu.
b) Using the local keypad.
Press the ADJUST key.
The projector displays the General access menu.
To enter the adjustment mode :
1. Push the cursor key é or ê to highlight enter ADJUST
2. Press ENTER. The path selection menu will be displayed.
Installation
Raster Centering
Optical Lens Focusing
Scheimpflug Adjustment
CRT Projection Angle Adjustment
Adjustment Mode
$'-867
67$1'%<
(17(5
(;,7
GENERAL ACCESS
Select with ,
or
then
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST