Barco Vision 708 9002357 Installation Manual - page 28
Installation Adjustments
7-8
5976026A BARCOVISION 708 200499
Loosen the four hexagon screws A, A', B and B', upper and lower fixation latch. These
screws fasten the cooling house of the red tube.
Pivot the red CRT until the center of the red image coincides with the center of the green image.
If the angle of the red CRT is corrected, tighten the four bolts.
Screws A, B, C and D (M4) : upper
fixation latch. nutdriver 7mm.
Screw A', B', C' and D' (M4) : lower
fixation latch. nutdriver 7mm.
red crosshair
green crosshair
red crosshair
green crosshair
Move the red CRT
to the outside,
away from the
green CRT
Move the red CRT to-
wards the green CRT
Loosen the four hexagon screws C, C', Dand D', upper and lower fixation latch. These
screws fasten the cooling house of the blue tube.
Pivot the blue CRT until the center of the blue image coincides with the center of the green
image. If the angle of the red CRT is corrected, tighten the four bolts.
blue crosshair
green crosshair
blue crosshair
green crosshair
Move the blue CRT
to the outside,
away from the
green CRT
Move the blue CRT
towards the green
CRT
$
%
&
'
$
%
&
'
$
$
%
&
%
&
'
'
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs