Barco Vision 708 9002357 Installation Manual - page 31
G2 Adjustment
A-1
5976026A BARCOVISION 708 200499
SERVICE MODE
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then
A
G2 ADJUSTMENT
Enter the adjustment mode by pressing ADJUST and highlight
Service. Press ENTER to start up the service mode.
G2 adjustment
Select with or
then
Highlight 'Common settings' and press ENTER.
Highlight G2 adjust and press ENTER.
Select with or
then
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
I2C DIAGNOSTICS
A safety notice will be displayed to warn the operator.
If you are qualified, press ENTER to continue with the G2 adjustment,
otherwise press EXIT to return to the service menu.
If ENTER is pressed, the G2 menu will be displayed.
Select color with ç or è
G2 ADJUSTMENT
RED
ABL : ON
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
IF QUALIFIED, PRESS
IF NOT,
SAFETY
NOTICE
RISK OF ELECTRICAL SHOCK
G2 ADJUSTMENT SHOULD
BE PERFORMED BY BARCO
PERSONNEL OR BARCO
AUTHORIZED DEALERS