Bass BALL Owner's Manual - page 13
BALL
– Floating Wireless Sound System
2012_V2 Page 13 von 14
lamps or motors.
Resetting the Unit
If the unit experiences a power surge or electric shock, it is possible that the internal micro-controller
may lock up and the unit will not respond to any commands from the top panel controls.
In this event, use a straightened paper clip, toothpick or similar objects to press the RESET button
located at the inner bottom of the Speaker (see the below figure). The reset operation clears the sys-
tem memory and all of your previous settings will be erased.
CAUTION: DO NOT USE SHARP, POINTED OBJECT TO PRESS THE RESET BUTTON.
IT MAY DAMAGE THE RESET SWITCH INSIDE THE UNIT.
12 Technical Data
Transmitter
Battery for operation:
DC1.5V “AA” (UM-3) type alkaline battery x 3 (not included)
Speaker
Battery Back-up for clock / memory: DC3V CR2032 Lithium Battery x 1 (included)
Battery for operating the unit:
DC1.5V “AA” (UM-3) type battery x 6 (not included)
Operating Frequency for wireless transmission mode:
3 Channels (For EU version): 863.5MHz / 864MHz / 864.5MHz
3 Channels (For USA version): 914MHz / 914.5MHz / 915MHz
FM Radio Frequency Range and Time Display Format:
13 Compliance with FCC Regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against