Bass BALL Owner's Manual - page 8
BALL
– Floating Wireless Sound System
2012_V2 Page 8 von 14
Never switch to "RECHARGE ON" position when regular battery (e.g. alkaline type battery) is installed
which will damage the battery or may cause explosion.
(6) Close the inner battery cover and lock it.
(7) To close the unit, grip the lower housing and turn it clockwise until it locks tight with the upper
housing.
Battery low detection
If the “low-battery” indicator
displays, the unit may operate abnormally. You need to replace the
used alkaline battery by the fresh one or to recharge the rechargeable battery.
- Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
- Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel- cadmium) batteries.
- Only batteries of the same or equivalent type as recommend are to be used.
- If the unit is not to be used for an extended period of time, remove the battery.
- Do not dispose of batteries in fire, battery may explode or leak.
- Danger of explosion if battery is incorrectly replaced.
Power Adaptor Connection for the Transmitter
The Transmitter can be powered by an external AC-DC power adaptor, required the output DC 5V
500mA (not included).
(1) Connect the adaptor's DC output plug to the DC IN jack of the transmitter.
(2) Firmly and securely plug the adaptor's AC plug into AC main outlet.
Power Adaptor Connection for charging the Speaker unit rechargeable battery
You can use the same AC-DC power adaptor (the output DC 5V 500mA) to charge the rechargeable
battery in the Speaker unit.
(1) Connect the adaptor's DC output plug to the DC IN jack of the unit.
(2) Firmly and securely plug the adaptor's AC plug into AC main outlet.
(3) The inner portion of the battery indicator running (blinks) on display.
CAUTION
CAUTION