Baudoulin 6 M26.2 Operating And Maintenance Manual - 300 - Servicing Operations
SHEET 2: Copy to be kept in your manual
F2 inspection and servicing operation
Engine serial number:
Commissioning date:
Number of hours of operation:
After 400 (P1) and 300 (P2) hours of operation, the user must have the following operations carried
out by a S. I. Moteurs Baudouin approved agent or outlet (boxes to be ticked by the agent only):
1 - Adjust the rocker arm and cross-bar play
2 - Change the engine oil
3 - Replace the oil cartridges
4 - Bleed / clean (fuel circuit)
- fuel prefilter (option)
- the water separator filter (option)
5 - Check the dry air filters
6 - Check
- belt tension
- tightness of all collars and hoses
- tightness of inspection traps
- that safety devices are working properly
7 - Operational test
NOTE: Any supplies are at the customer’s expense
AGENT
Name:
Date:
Stamp and signature
CUSTOMER
Name:
(in capitals)
Date:
Signature
Comments
Engine type:
This is mandatory for the manufacturer’s warranty to remain valid.
D
300 - Servicing operations
After 400 hours (P1 Service)
After 300 hours (P2 Service)
- 2/2 -
00350 - Edition 01 - September 1
1
Maintenance
F2
Non-contractual
illustrations