Baudoulin 6 M26.2 Operating And Maintenance Manual - 400 - Maintenance Operations
- 1/6 -
00374 - Edition 01 - September 1
1
Maintenance
M1
Non-contractual
illustrations
D
400 - Maintenance operations
After 400 hours (P1 Service)
After 300 hours (P2 Service)
SAFETY WARNING
Users should carefully read the safety instructions prior to any intervention.
Summary of maintenance operations
b
engine oil change
1/6
b
oil sump filling
3/6
b
oil filter replacement
4/6
b
bleed the water separator filter (option)
4/6
b
cleaning the fuel prefilter (option)
5/6
b
inspection and replacement of the zinc anode
5/6
b
finalising operations
M1
5/6
M1
Fill in the maintenance table on sheet D1000
Engine oil change
b
Manual pump: use the manual pump, with the engine
switched off, to change the oil.
b
Check that the 3-way valve is in "Oil change" position as
indicated below, and activate the sump pump manually.
b
Reposition the 3-way valve to "Pre-greasing" position once
the oil has been changed.
b
Fill the engine casing with oil
.
PR Catalogue
see chapters
03
04
05
Sump pump
Pre-greasing
Oil change
Oil change frequency
Note: see
DT 04.G01 for the choice lubricant based on
service rates.
DT 04.G01
Engine
Nominal
power
Nominal
rating
Application
Service
rate
Oil change
frequency
hp (kW)
mn
-1
6 M26.2
450 (331)
1800
P1
4
400
500 (368)
1800
P1
4
400
500 (368)
1900
P1
4
400
550 (404)
1900
P2
5
300