Bull ESCALA E Series Operator's Manual - page 56
X-2
Operator’s Guide
Q
QIC tape drive
cartridge data efficiency, 2-8
cleaning, 2-8
handling cartridge, 2-8
setting cartridge write-protect tab, 2-7
using the, 2-6
functions, 2-6
loading cartridge, 2-7
status lights, 2-6
unloading cartridge, 2-7
R
rear view, base unit, 1-4
rebooting the system.
See
system presentation,
accessing the system
reset button, 1-6
S
serial number.
See
system presentation
starting, daily startup, 3-3
starting the system.
See
system presentation,
accessing the system
status lights
3.5-inch diskette drive, 2-2
4 mm tape drive, 2-13
8 mm tape drive, 2-9
CD-ROM drive, 2-4
LEDs, operator panel state, 1-10
QIC tape drive, 2-6
stopping the system.
See
system presentation,
accessing the system
system, maintaining configuration variables, 3-5
system presentation
3x1 digit LED hexadecimal display, 1-9
accessing the system, 3-2
initial startup, 3-3
logging into, 3-3
Open Firmware, 3-5
rebooting, 3-4
starting, 3-3
stopping, 3-4
dimensions, 1-2
front view, 1-3
identifying the serial number, 3-9
LEDs, operator panel, 1-10
status light states, 1-10
operator panel, 1-5
Key Mode Switch, 1-7
reset button, 1-6
rear view, 1-4
rear view, connectors, 1-4
system unit, daily startup, 3-3
T
tape drive
4 mm using, 2-13
8 mm using, 2-9
QIC using, 2-6
U
unloading
3.5-inch diskette, 2-2
4 mm tape cartridge, 2-14
8 mm tape cartridge, 2-10
CD-ROM disk, 2-5
QIC tape cartridge, 2-7
using
3.5-inch diskette drive, 2-2
4 mm tape drive, 2-13
8 mm tape drive, 2-9
CD-ROM drive, 2-4
hard disk drives, 2-17
keyboard, 2-18
mouse, 2-19
QIC tape drive, 2-6
W
write-protect tab
3.5-inch diskette, 2-3
4 mm tape cartridge, 2-14
8 mm tape cartridge, 2-10
QIC tape cartridge, 2-7