Bullit DVD7200BT User Manual - page 21
Page 18 of 44 pages
DVD7200BT ENGLISH
When the monitor is open, the buttons
and
on the on-screen keyboard are also
available to change the frequency. Here you also have the option to search manually, by
pressing one of the buttons
and
for three seconds. MANUAL will be indicated in the
corresponding field. If there is no entry for about seven seconds, the device will switch back
to automatic station search. The corresponding field on the screen will indicate “AUTO”
again.
Storing a station with the station buttons
With the station buttons “1”, “2”, “3”, “4”, “5”, and “6” you can preset six programming spaces
each on each level of the wave band (e.g. “FM 1“, “FM 2”, or “FM 3”). To store the station,
select the corresponding station with the station search or manually. Press one of the buttons
“1”, “2”, “3”, "4", "5" or "6" until the radio sound is briefly muted in order to store the station.
Now the station is stored at the station button you selected. When the monitor is open,
please keep your finger on the corresponding station field until the playback is briefly
interrupted. Now the station is stored at the corresponding position.
Storing stations with automatic station search
The automatic station search scans for the strongest available stations and stores these
under the station selection buttons “1” - “6”. In order to start the search, press the “P.SCAN”
button and keep it pressed for more than two seconds. Now the scanner allocates all station
positions at the current level of the selected wave band as long as enough stations with
sufficient reception quality are available. After the scanning has ended, the stored stations
are automatically matched up with their station names and the station stored at the station
position “1” can be heard. Now the device will briefly play all stations in sequence and then
stop at the station under the station button “1”. When the monitor is open, the PSCN field is
available to you for this function.
Calling up stored stations
In order to access the stored stations, select the desired wave range with the “BAND” button,
e.g. “FM 1”. Press one of the six station buttons and you will hear the station stored there.
The corresponding applies when the monitor is open.
Checking stored stations
For this function, the stations stored under the station buttons of a particular wave length are
scanned for about five seconds. In order to begin checking, briefly press the “P.SCAN”
button. The station positions “1” - “6” will begin flashing on the display in sequence and the
corresponding stations will be scanned. When the monitor is open, the currently scanned
memory position has a lighted background and PRESET will be indicated on the display. The
PSCN field will be available to you here as well. To remain at the currently scanned station,
press the “P.SCAN” button or the PSCN field again. Then the setting will remain at the last
scanned station. If no entry is made by the end of the complete search, the device will play
the first station on the corresponding level (e.g. F1 or FM 1).
LOC function
The “LOCAL” function is relevant for the station search. Here you can select whether only
local, strong stations (“ON”) or also weaker, more distant stations (“OFF”) are searched for.
The “LOC” function prevents a corresponding switch to a stronger station as long as it isn’t
broadcasting the same program as the one currently being listened to. You can activate the
function by briefly pressing the screen button “LOC” once. Then the button switches colors
from grey to white. If the button sounds are turned on, a brief signal tone will follow. This
function can be turned off again by pressing the screen button "LOC" once more. Then the
color changes from white to grey again and this may be followed by a signal tone. This
setting only affects the radio mode and can only be carried out while the radio mode is
active.