Bullit DVD7200BT User Manual - page 28
Page 25 of 44 pages
DVD7200BT ENGLISH
position of “8” on one of the two sides, the speaker group on the opposite side will be muted.
To change this, turn the volume control dial again.
The setting is saved either when the desired value is confirmed by pressing the volume
control dial or through automatic storage (don’t change anything on the device for approx.
five seconds). If you confirm the selection by pressing the volume control dial, you will reach
the next possible setting. If you use the automatic memory, the device will return to the
standard display.
Changing the volume distribution (FADER)
After pressing the volume control dial four times, the settings for the speaker distribution
between the front and rear speaker group (FADER) will be reached. The message “FAD” will
appear on the display along with the set volume ratio between the front and rear speaker
group (e.g. “FAD 2F”). To change the ratio between the speaker groups, turn the volume
control dial clockwise or counter-clockwise. Depending on the direction in which the volume
control dial is turned, an “R” or an “F” will appear on the display, together with a digit (e.g.
“F2” or “R3”). These provide information about the direction in which the volume ratio is
changed and about the amount of the change. The ratio between the right and left speaker
group can be set in a range between “F8” and “R8”. The volume ratio between the speakers
changes according to the setting. The volume of one speaker group increases, the other
decreases. If the ratio is set to “R-F”, the volume on both speaker groups is the same. If the
control dial for one of the two speaker groups is turned to the maximum setting “8”, the other
speaker group is muted. To change this, turn the volume control dial again.
The setting is saved either when the desired value is confirmed by pressing the volume
control dial or through automatic memory (don’t change anything on the device for approx.
five seconds). If you confirm the selection by pressing the volume control dial, you will return
to the standard display. If you use the automatic memory, the device will return to the
standard display.
Note:
If you press the volume control dial again after you reach the last settings option (here
FADER), you will return to the standard display. If no changes are made for five seconds, the
device will automatically return to the initial display. In DVD mode (with an open monitor), the
settings option FADER is also followed by the functions BRIGHT, CONTRAST, COLOR and
SHARP.
Menu settings level 2
You can reach menu level 2 by pressing the volume control dial for approx. two seconds.
The individual menu items can be reached by repeatedly pressing the control dial. At menu
level 2, the functions “LOC” (distance setting for station search), “LOUD” (sound setting),
“ST-MO” (switching between stereo and mono playback), “CT” (set time of day), “TAVOL”
(standard volume for traffic announcements), “EON” (automatic station switch for traffic
announcements), “D/Z” (setting of the second playback level - DUAL ZONE) can be set.
When the monitor is open, the functions referred to above are available to you under the
following alternate terms: ST-MO = STMO, CT = TIME, TAVOL = TA VOL.
LOC function to set the station search
The “LOCAL” function is relevant for the station search. Here it can be selected whether only
local, strong stations (“ON”) or also weaker, more distant stations (“OFF”) are searched for.
The “LOC” function prevents a corresponding switching to a stronger station as long as it
isn’t broadcasting the same program as the one currently being listened to. To activate the
“LOC” function, press the volume control dial until menu level 2 is reached. The “LOC”
function will appear. Now you have the option of activating (“LOC ON”) or deactivating (“LOC