Bullit DVD7200BT User Manual - page 29
Page 26 of 44 pages
DVD7200BT ENGLISH
OFF”) the function by turning the dial. The setting is saved either when the desired value is
confirmed by pressing the volume control dial or through automatic memory (don’t change
anything on the device for approx. five seconds). If you confirm the selection by pressing the
volume control dial, you will reach the next possible setting. If you use the automatic
memory, the device will return to the standard display.
Note:
This setting only affects the radio mode and can only be carried out while the radio mode is
active.
LOUD function for the tone setting – loudness
The “LOUD” function makes it possible to emphasize low and high frequencies through the
push of a button in order to increase sound perception in an adjustment to the respective
volume. To activate the “LOUD” function, press the volume control dial until menu level 2 is
reached. The “LOC” function will appear. Press the volume control dial repeatedly until you
get to the menu item “LOUD”. There you will have the option of activating (“LOUD ON”) or
deactivating (“LOUD OFF”) the function by turning the dial. The setting is saved either when
the desired value is confirmed by pressing the volume control dial or through automatic
memory (don’t change anything on the device for approx. five seconds). If you confirm the
selection by pressing the control dial , you will reach the next possible setting. If you use the
automatic memory, the device will return to the standard display. When the “LOUD” function
(“LOUD ON”) is activated, the message “LOUD” appears on the display. This is turned off
after deactivation.
ST – MO function to switch between stereo and mono playback
This menu item gives you the option of selecting between stereo and mono playback. To
reach the menu, press the volume control dial until menu level 2 is reached. The “LOC”
function will appear. Now briefly press the volume control dial repeatedly until you reach the
menu item “ST-MO”. There you will have the option of selecting between “ON” and “OFF” by
turning the dial. The selection “ON” will turn the mono playback on. “OFF” will turn the stereo
playback back on again. The setting is saved either when the desired value is confirmed by
pressing the volume control dial or through automatic memory (don’t change anything on the
device for approx. five seconds). If you confirm the selection by pressing the control dial , you
will reach the next possible setting. If you use the automatic memory, the device will return to
the standard display. This setting only affects the radio mode and can only be carried out
while the radio mode is active.
CT function to set the time of day
To set or change the time settings, press the volume control dial until you get to menu level
2. The “LOC” function will appear. Press the volume control dial repeatedly until you get to
the menu item “CT”. There you have the option of setting the time of the device by turning
the dial. Turning to the right changes the number of the hours, turning to the left, the minutes.
The setting is saved either when the desired value is confirmed by pressing the control dial
or through automatic memory (don’t change anything on the device for approx. five seconds).
If you confirm the selection by pressing the volume control dial, you will reach the next
possible setting. If you use the automatic memory, the device will return to the standard
display. If the device receives an RDS station with an RDS time signal, the clock will be
automatically updated in particular intervals.
TAVOL function to set the volume for traffic announcements
The “TAVOL” function enables an adjustment of the volume of traffic announcements
according to individual preferences. To change the device’s volume for traffic
announcements, press the volume control dial until menu level 2 is reached. The “LOC”
function will appear. Press the volume control dial until you get to the menu item “TAVOL”.