Bullit DVD7200BT User Manual - page 24
Page 21 of 44 pages
DVD7200BT ENGLISH
Insert / remove DVD/CD
Before inserting a CD/DVD, make sure that no data carrier has already been inserted by
pressing the “EJ” button. To insert the CD/DVD, slide it into the insertion slot with the printed
side up. It will automatically be drawn inside. The message “LOADING” will be indicated on
the display. Then the message “01" will appear, followed by the time display of the track,
which thus shows that the first track on the data carrier is now being played back. To eject
the CD/DVD, press the “EJ” button again and remove the ejected data carrier. When the
monitor is open, the screen menu is also available to you for the ejection of the data carrier.
Caution:
-
Only customary CD/DVD formats may be inserted into the insertion slot (Ø 12cm).
-
Make sure that no foreign objects enter the insertion slot.
-
Never use force when inserting the CD/DVD; this could damage the device as well as
the CD/DVD. Never use force to try to prevent the device from pulling in a CD/DVD. If
necessary, eject the CD/DVD again. If an ejected data carrier isn’t removed within
approx. ten seconds, it will be drawn back into the slot to prevent damage to the
device.
Playback / pause / stop
To pause the playback, briefly press the “Pause” button. “PAUSE” will be indicated on the
display. To continue the playback, press the “PAUSE” button again. To end the playback,
briefly press the "Stop" button. “STOP” will be indicated on the display. When the monitor is
open, the screen menu is also available to you for these functions.
Selecting or repeating tracks
By briefly pressing the
button, the playback jumps to the next track. If you press the
button, the playback returns to the beginning of the current track. If the
button is pressed
twice, the playback jumps back to the previous track. You can briefly press both the
and
buttons until the number of the desired track appears on the display. When the monitor is
open, the screen menu is also available to you for these functions.
Fast forward and rewind
To fast forward, briefly press the
button once. Then the playback speed is increased to
2x. If the button is pressed once more, the speed is doubled again. This can be continued
up to the maximum advancing speed of 32x. You can stop this process by briefly pressing
the
button once or pressing the
button one more time after the advancing speed of
32x has been reached. For a quick rewind, use the
button in a corresponding manner. To
control the process, the increasing or decreasing minute and second amount is indicated on
the display. When the monitor is open, the screen menu is also available to you for these
functions.
Repeating tracks (Repeat)
To repeat a track, keep the
(RPT)
button pressed until “R-ONE“ appears on the display.
The abbreviation “RPT” is shown and the current track is repeated. To repeat the entire
folder or CD, press the
(RPT)
button again until “R-ALL“ appears on the display. When
the monitor is open, the messages “SPUR” will appear for “R-ONE” and “ALL” for “R-ALL”.
To end the function, press the
(RPT)
button again until “R-OFF“ appears on the display.
The abbreviation “RPT” will be turned off and the playback of the tracks will continue
normally.
Intro
To briefly scan the tracks on an audio CD, press the
(INT) button during the playback
until “INT“ appears on the display. Then all tracks will be scanned for approx. ten seconds.