C.E.C. TL5 Owner's Manual - Programmed Cd Playback
12
Playback in Program Mode
Press the PLAY/PAUSE
/ button while the " PRGM "
indicator is shown on the display to play the programmed
tracks.
□
To return to the normal playback mode, press the
PROGR AM button while playback is stopped.
The " PRGM " indicator will disappear from the
display. To return to the program mode, press the
PROGRAM button again.
Checking, Adding, Changing and Deleting
programmed tracks
Programmed tracks can be checked, added, changed
and deleted under the program mode while playback is
stopped.
❶ Checking the playback order of programmed tracks
Press the CHECK button repeatedly to show the
playback order of programmed tracks. The display
changes to show " - - " when you reach the next to the
last track in the program.
Pressing the CHECK button again here will display
the fi rst track in the playback order.
□
If you press the STOP
button, the display will jump
back to the fi rst track in the programmed order.
❷ Adding tracks to the program
To add one track to the current program, press the
STOP
button and select the track number with the
numeric keys. The new track will be added to the end
of the current playback order. Repeat this process to
add more tracks to the program. Press the STOP
button to complete the track-adding phase.
❸ Changing tracks in the program
To change one track in your programmed playback
order, press the CHECK button repeatedly until the
track number in question is displayed, then select a
new track number. The new track will overwrite the
existing track. Repeat this process to change more
tracks. Press the STOP
button to finish the track-
changing phase.
Programming
Up to 32 tracks in a customized playback order can
be programmed by using the remote control unit while
playback is stopped.
❶
Press the PROGRAM button on the remote control unit
to activate the program mode. " PRGM " is displayed,
and " 1" as temporary track number blinks and " 1" as
the fi rst playback order is displayed.
❷
Select a track number by pressing the numeric keys
on the remote control unit. The selected track will be
added to the program. For example: Press key-5 to
add the 5th track to the 1st playback order, then press
key-3 to add the 3rd track to the 2nd playback order.
Repeat this process to program additional tracks.
□
In case that a number beyond the last track number
on a disc is selected the last track may be added
alternatively.
□
After the 1st playback track is added you can select
an addition track by pressing skip buttons as well.
The selected track number blinks. Then press the
PROGRAM button to add the track to the program.
In this way press the PROG. button to add the track
every after blinking a track number by pressing skip
buttons.
❸
Press the STOP button to complete the programming
phase. The 1st playback track number is displayed. If
32 tracks are programmed " FULL" is displayed as well.
Playback order
Track number