C.E.C. TL5 Owner's Manual - Programmed Cd Playback
13
Programmed CD Playback
- continued -
❹ Deleting Programmed Tracks
□
All tracks: to clear the entire program, hold down
the CLEAR button for more than 2 seconds.
□
One track: to clear one track from the program,
press the CHECK button repeatedly until the track
number in question is displayed, then press the
CLEAR button. Repeat this step (CHECK then
CLEAR) to remove more tracks from the program.
□
The entire program will be deleted automatically
when you open the CD door or turn the power off.
❶ Handle the CD stablizer withe care
The CD stabilizer is quite heavy. Please handle it
carefully not to drop to damage other equipment and/
or furniture. And the distortion of the CD stabilizer may
damage the CD reading performance. Please note
that it is a quite expensive highly precise component.
❷ When mounting the CD stabilizer
Make sure to mount the CD stabilizer on CD-
turntable vertically. An inclination of installation of
the stabilizer to the spindle shaft may cause unstable
reading of the music signal.
❸ Don't touch the CD stabilizer before stop
Don't touch the CD stabilizer as well as disc when it
is rotating after music. Pressing the CD stabilizer down
strongly may damage the CD mechanism.
❹ Don't touch the pick-up lens
Laser pickup is one of the most important compo-
nents for the performance of CD player. Don't touch
the lens by finger. Make sure to close the CD door
when CD player is not used for clean maintenance of
the laser pick-up lens.
❶
If the surface of the TL5 case becomes soiled, wipe
with a soft cloth or use diluted neutral cleaning
liquid. Be sure to remove any fluid completely. Do
not use thinner, benzene, alcohol, chemical cloths or
bleaching agents as these may damage the surface
of the TL5 case. Also avoid using aerosol insecticides
near this appliance.
❷
If dust accumulates on the CD-Turntable, remove it
with stick tape (e.g. Scotch tape). Make sure not to
touch the optical pickup lens with your fi ngers.
❸
TL5 requires no periodic maintenance except the belt
replacement mentioned on page 14, and contains no
other user-serviceable parts. Contact your dealer or
an authorized CEC service center for an inspection
and repair in case of malfunction.