C.E.C. TL5 Owner's Manual - Compact Disc Handling
5
□
When taking a compact disc from its case, lift it out by
holding the edge of the disc while pressing down on
the center button of the case.
□
Since a compact disc can be played or recorded only
on one side, discs should always be placed on the
CD-Turntable with the label side up.
□
Handle compact discs with care so as not to scratch
their surfaces. Scratches, fi ngerprints or soiling may
cause reading errors during playback.
□
If a compact disc’s surface becomes soiled, wipe it
directly away from the disc’s center with a soft, dry
cloth. Try to keep the discs clean at all times.
□
Never use chemicals such as record sprays, anti-static
sprays, benzene or thinner to clean a disc. These may
corrode the surface of a disc.
□
Do not place discs in any locations subject to high
temperatures and high humidity, or that receive direct
sunlight. Keep discs away from radiators and electrical
heaters. CD-R/RW discs are especially sensitive to
ultraviolet rays, so keep them out of direct sunlight.
□
To avoid dust and scratching or warping of discs that
could cause reading errors, replace discs in their
cases after use.
□
Do not attach any labels on a disc surfaces. Do not
use discs that have Scotch tape, labels, excessive
label glue exposed on the surface. These may cause
this appliance to malfunction.
Compact Disc Handling
□
Do not use cracked discs or irregularly shaped discs
(octagonal, heart-shaped, or any other special shapes).
These may cause this appliance to malfunction.
CD-R/RW DISC
□
This appliance is able to playback CD-R/RW discs
recorded in audio CD format and finalized. Some
CD-R/RW discs may be unplayable due to the quality of
the CD-R/RW disc and/or the quality of the recording.
□
Do not attach stickers or protective seals on discs and
do not use any protective coating sprays. If you wish
to label a disc, only write on the label side using soft-
tipped insoluble pens. Never use ballpoint pens or
hard-tipped pens.