Cabletron Systems SmartSTACK ELH100 Installation And User Manual - Network Cable Requirements
Manual is about: FAST ETHERNET HUB
of
122
9033060
Installation 23
Network Cable Requirements
Copper
Table 2-3 specifies the cable types and length constraints for the various
copper interfaces on the ELH100-12/24TX.
Table 2-3. Copper Cable Specifications
Fiber
Table 2-4 specifies the fiber types, bandwidth requirements, and length
constraints for the Fast Ethernet fiber interface on the fiber optic switch/
media modules.
Table 2-4. Fast Ethernet Fiber Specifications
Interface Type
Cable Requirement
Maximum Length
10Base-T
Category 3 or 5 Unshielded Twisted
Pair (UTP)
100m (328 ft.)
100Base-TX
Category 5 UTP
100m (328 ft.)
Interface Type
Fiber Type
Fiber Diameter
(microns)
Maximum Length (m)
100Base-FX (SC
connectors)
multi-mode
62.5
2,000m (6,560 ft.)