Cabletron Systems SmartSTACK ELH100 Installation And User Manual - Hub Statistics Menu
48 ELH100-12/24TX User Interface
ELH100-12/24TX
Hub Statistics Menu
The Hub Statistics screens display statistics for the 10 and 100 Mbps
stack segments. These values can be used to indicate the approximate
loading for each segment. You can use the Hub Statistics Overview
screen to display key statistics for all hubs in a stack or detailed statistics
for each individual hub. The Hub Statistics screens are shown in
Figure 3-18 and Figure 3-19, and described in the accompanying tables.
Figure 3-18. Hub Statistics Overview Screen
Hub Statistics Overview
=======================
10Mb/s Segments
Hub Frames
Bytes
Collisions CRC Errors Tot.Errors Reset
Details
--- -------- ------- ------- -------
------- -------
------
1
892
121329
0
0
0
100Mb/s Segments
Hub Frames
Bytes
Collisions
CRC Errors
Tot.Errors
--- ------- -------- ------
--------
-------
1
736685
112506135
425
6
620
Press
Use
Field
Description
Hub
Hub identifier within the stack.
Frames
Number of frames passing through this hub.
Bytes
Number of bytes passing through this hub.
Collisions
Number of simultaneous node transmissions detected by this hub.
CRC Errors
Number of Ethernet Cyclic Redundancy Check errors detected by
this hub.
Total Errors
Total number of errors, including FCS, alignment, Frames Too
Long, Short Events, Late Events, Jabber, and Data Rate
Mismatches detected on this device.
Reset
Resets the statistics counters for the hub.
Details
Highlight “Detail” and press
screen for the hub.
Refresh Statistics
Refresh the displayed statistics.
Auto-Refresh
Statistics
Refresh statistics at the interval specified in Console Configuration.