Caliber HBC 431DAB-BT Instruction Manual - Instruction Manual
INSTRUCTION MANUAL
HBC 431DAB-BT - DAB+/DAB / FM / BT / USB & CD/MP3 Boom Box
and functionality. Only one device per profile can be connected concurrently.
Advanced Audio Distribution Profile (A2DP)
- High-quality stereo audio connection
- Streaming of stereo music from PC, mobile phones…etc
Audio Video Remote Control Profile (AVRCP)
- Device remote control
- Control connected device
Stereo music connection to your mobile phones
This connection requires a mobile phone supporting the Bluetooth A2DP profile for stereo music
connection. In order to create new Bluetooth connection you will need some familiarity with the
Bluetooth functions of your mobile phone. As each phone operates slightly differently, please
familiarize yourself with the Bluetooth capabilities of your device before connecting.
1. Ensure that the Bluetooth on your mobile phone is powered on. You might need to refer to the
phone user manual for details.
2. Ensure the unit and the phone are closed in place and ideally they are no more than 3 feet apart.
3. Repeatedly press the Standby/MODE button to select Bluetooth mode, the display will show
“Bluetooth”. Set the A2DP-capable phone to search for Bluetooth devices and follow the
instructions on the phone's screen. You will recognize the unit by its Bluetooth name
“HBC431DABBT_CALIBER". In case that you are prompted for a passkey, enter either “0000” or
“8888”.
4. Select and confirm the pairing on your phone, the connection will be completed in a few seconds
and the radio will produce a beep tone, and you can now start your Bluetooth music streaming
operation.
5. Press the ►/II button on the unit or select starting playback on your phone to start the music
playback.
6. To interrupt playback, press the ►/II button again or select “PAUSE” on your phone.
7. To skip forward or back to other songs during playback, press the ◄ or ► button on the unit or
select the “skip controls” on your phone.
AUX INPUT
There is a 3.5mm AUX IN jack located at the back of the unit, analogue audio sound signals from other
sources can be input to the unit through this jack.
1. Connect the input to other analogue audio source via a cable with 3.5mm jack.
2. Repeatedly press the Standby/MODE button until the display shows “Aux”.
3. Adjust the volume control for your desired sound output level.