Caliber HBC 431DAB-BT Instruction Manual - Instruction Manual
INSTRUCTION MANUAL
HBC 431DAB-BT - DAB+/DAB / FM / BT / USB & CD/MP3 Boom Box
SLEEP FUNCTION
This function allows you to program the unit to switch off itself after a set period of time. You can set
your sleep time during unit operation:
1. Repeatedly press the TIMER/SLEEP button to select the sleep time, it will change in sequence on
every press: 15 > 30 > 45 > 60 > 90 > Off > 15 > 30 > ….
2. When the display shows your desired sleep time, release the button, the sleep timer is now
activated and the display will show the elapsed sleep time. When the sleep time counts to zero,
the unit will go off.
3. To cancel sleep sooner, repeatedly press the TIMER/SLEEP button until the display shows “Off”.
TIMER FUNCTION
This function allows you to program the unit to switch on itself at your desired operation mode and
time.
1. To set the on timer clock, ensure the unit is in standby, press and hold the TIMER/SLEEP button
until the display shows the timer icon and the on timer clock. The “hour” digit of the timer clock
will flash.
2. Press the ◄ or ► button to set to the desired hour, then press the SELECT button to confirm, first
set the hour and finally the minute, the on timer clock is set.
3. Then you will enter into the timer on mode setting, press the ◄ or ► button to select
DAB/FM/CD/USB followed by pressing the SELECT button to confirm.
4. After the mode is selected, you will continue to go for the timer on volume level setting. (If DAB or
FM is being selected, you will need to select the recalled preset station number first). The timer
setting is now completed.
5. To activate the timer function, switch the unit to standby, repeatedly press the TIMER/SLEEP
button to cycle through the following timer modes: Timer Off > Timer On Mode: DAB > FM > CD >
USB > Timer Off > ...
6. When your desired timer mode appears in the display, release the button, the timer function is
activated and the display will show the timer icon.