Caliber HBC 431DAB-BT Instruction Manual - Instruction Manual
INSTRUCTION MANUAL
HBC 431DAB-BT - DAB+/DAB / FM / BT / USB & CD/MP3 Boom Box
listed with a ‘?’ prefix.
1. To perform Prune, in DAB mode, press and hold the INFO/MENU button to enter into the Menu,
repeatedly press the ◄ or ► button followed by pressing the SELECT button to select “Prune”.
2. Again press the ◄ or ► button followed by pressing the SELECT button to select
DAB SECONDARY SERVICES
On some occasions you will see a “>” symbol directly after the name of the station, this indicates that
there are secondary services available to that station. These secondary services contain extra services
that relate to the primary station. E.g. a sports station may want to add extra commentaries. The
secondary services are inserted directly after the primary station. To select the secondary station, press
on the SELECT button once.
DAB DISPLAY MODES
During DAB operation, repeatedly press on the INFO/MENU button will cycle through the following
display modes: DLS > Signal strength > Program Type > Ensemble/Multiplex (Group name) >
Frequency > Signal error > Audio Bit Rate > Time > Date > DLS > …
DLS
DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include
in their transmissions. The message usually includes information such as program details …etc.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the
bar will be from left to right.
Program type
This describes the style of the program that is being broadcast. If the information is not available, the
display will show “
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in
a single frequency. There are national and local multiplexes, local ones contain stations that are specific
to that area.
Frequency
The frequency of the present station will be displayed.