1. DL manuals
  2. Cambridge Audio
  3. Switch
  4. Incognito LM10
  5. Installation Manual

Cambridge Audio Incognito LM10 Installation Manual

Other manuals for Incognito LM10: Installation Manual
Manual is about: Multi-room Installation guide

Summary of Incognito LM10

  • Page 1

    Lm10 local input module installation guide.

  • Page 2

    2 incognito lm10 contents introduction......................................................3 specifications...................................................3 system set-up ..................................................4 mounting the lm10..........................................6 fitting the ...

  • Page 3

    Incognito lm10 incognito lm10 3 thank you for purchasing this cambridge audio incognito product. The lm10 local input module is an in-wall module that allows the user to add an additional local source to those distributed by the ah10. The local source may only be heard in the room where it is connec...

  • Page 4

    4 incognito lm10 ah10 hub ir1 cat-5 kp10 keypad cat-5 lm10 r l ir speakers speaker cable lr10 remote control system set-up (eu version).

  • Page 5

    Incognito lm10 incognito lm10 5 ah10 hub ir1 cat-5 kp10 keypad cat-5 lm10 r l ir speakers speaker cable lr10 remote control system set-up (cu version).

  • Page 6

    6 incognito lm10 mounting the lm10 locate the lm10 near the local source. Check all connections and test the system’s operation before installing the lm10 into the wall. Using the included hardware, install the lm10 into a standard electricians back-box (pattress) (lm10-eu=uk47mm depth single gang, ...

  • Page 7

    Incognito lm10 incognito lm10 7 safety precautions avoid placing the lm10 near to dimmer switches or other items, which generate a lot of electrical noise. Avoid fitting the lm10 in areas of high humidity. The lm10 runs on 24v dc supplied through the connecting cable. As such there is no mains volt-...

  • Page 8

    8 incognito lm10 cat-5 connections a cat-5 cable is used to connect the lm10 to a keypad output on an ah10 hub and to a kp10 amplified control module. Use cat-5 cables (use eia/tia 568a rj-45 wire configuration, see page 7) to connect from the hub to a lm10 wall plate (optional), and then wire from ...

  • Page 9

    Incognito lm10 incognito lm10 9 eu version cu version ah10 hub ah10 hub lm10 rear lm10 rear kp10 kp10 speaker cable speaker cable main zone sw2 sw2 sw1 sw1 out out out in out in in in main zone cat-5 cat-5 cat-5 cat-5.

  • Page 10

    10 incognito lm10 it is possible to add up to two lm10 units per main zone. This gives you the option to listen to either one by selection from the keypad or lr10 remote control (local1/local 2). The module needs to be told whether there are one or two lm10’s present. Dual lm10s fitted in a single z...

  • Page 11

    Incognito lm10 incognito lm10 11 eu version cu version ah10 hub sw1 sw2 sw1 sw2 out out in in out out in in local source 1 local source 2 kp10 speaker cable cat-5 cat-5 cat-5 ah10 hub out out out in out in in in kp10 speaker cable local source 1 local source 2 cat-5 cat-5 cat-5 sw2 sw1 main zone mai...

  • Page 12

    12 incognito lm10 single lm10 with main and sub-zone fitted connect the lm10 as shown in the diagrams. Switch over sw1 (lc1) to the on position and sw2 (lc2) to the off position. The lm10 will respond to the local 1 remote command when selected. Eu version ah10 hub sw1 sw2 kp10 kp10 speaker cable sp...

  • Page 13

    Incognito lm10 incognito lm10 13 cu version ah10 hub sw2 sw1 local source 1 out out in in kp10 kp10 cat-5 cat-5 cat-5 cat-5 sub-zone main zone speaker cable speaker cable.

  • Page 14

    Dual lm10s with main and sub-zones fitted connect the lm10s as shown in the diagrams. Local source 1 – switch over sw1 (lc1) to the on position and sw2 (lc2) to the off position. Local source 2 – switch over sw1 (lc1) to the off position and sw2 (lc2) to the on position. Note: if using an lr10 to se...

  • Page 15

    Incognito lm10 incognito lm10 15 source rotate for local 1&2 on the keypad note: this feature is only available if the kp10 is part of a full incognito multi-room system with one or two local input modules (lm10) fitted. The local source selection mode will need to be activated to configure the kp10...

  • Page 16

    16 incognito lm10 source rotate for local 1&2 on the keypad continued continuing to hold both keys down will light led 3 indicating that sources 1–6 + local source 1 mode is available for selection. Continuing to hold both buttons will light led 4 indicating that sources 1–6 + local source 1 + local...

  • Page 17

    Incognito lm10 incognito lm10 17 l – local gain r – local gain l – local gain r – local gain lm10 lm10 audio level adjustment the lm10 also has a local infra-red (ir) output allowing for local source equipment to be con- trolled via an ir1. This will only pass through remote source or commands once ...

  • Page 18

    18 incognito lm10 limited warranty cambridge audio warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). Cambridge audio will repair or replace (at cambridge audio’s option) this product or any defective parts in this product. Warranty per...

  • Page 19

    Incognito lm10 incognito lm10 19.

  • Page 20

    Incognito lm10 www.Cambridge-audio.Com part no. Ap21476/1.