Cambridge Audio Sonata AR30 User Manual - page 12
12
Remote control
The Sonata AR30 and DR30+ are both supplied with a Navigator remote
control that operates the units.
Standby/On
Switches the unit between Standby mode (indicated by dim power LED) and
On (indicated by bright power LED). Standby is an eco power mode where
the power consumption is less than one watt. The unit is designed so that
it can be left safely in Standby mode when not in use.
Note:
In standby mode, the DD30 docking station will not charge your iPod,
because the unit has less than one watt power consumption.
0-9 numeric buttons
Press to recall stored presets.
Numerical select
To recall a preset number greater than ten, press -/-- followed by the
required preset number.
Mute
Mutes the audio on the unit. Press again to cancel mute.
Band
AR30
– Switches the unit between FM, AM and SIRIUS (if fitted, US version
only) bands.
DR30+
– Switches the unit between DAB and FM bands.
Volume
Increases or decreases the volume of the unit.
It is also used to change the value of the selected menu settings in audio
setup and advanced setup menus.
Navigation
In preset mode, press to step through the preset stations.
To navigate around presets, press the directional arrows up or down. If an
iPod is inserted in the attached docking station and MP3 source selected,
you can use the navigation keys to browse your iPod’s content.
Select
Press to accept the item/function highlighted in the display menu, or while
navigating your iPod.
In tuner mode, press and hold to store the current station in the preset
bank.
Note:
If browsing through DAB stations, press
Select
to immediately tune
to the current station (DR30+ only).
Skip/Scan
Sonata AR30
– In AM/FM manual mode, press and hold to scan to the next or previous
station. Short press once to fine-tune frequency. Refer to the 'Tuning
and listening' section of this manual.
– In SIRIUS manual mode, select through all available channels.
Sonata DR30+
– In FM manual mode, press and hold to scan to previous or next available
stations. Short press once to fine-tune frequency. Refer to the 'Tuning
and listening' section of this manual.
– In DAB manual mode, you can step through the stations stored
alphabetically in the DAB database. Press the
button to step through
to previous stations or
to step through to the next stations. If you wish
to perform a complete scan of all available stations, press and hold
down the
button. Refer to the 'Tuning and listening' section of this
manual.