Cambridge Audio Sonata AR30 User Manual - page 19
19
AR30
DR30+
ENGLISH
Setting presets
Radio stations can be stored into the memory presets for easy access. You can store
up to 20 presets for each band (for example, 20 presets for the AM band plus 20
presets for the FM band and 20 presets for the DAB band).
1. Select the station you wish to store and hold down the
Select
button. The display on
the unit shows the next available preset.
2. Rotate the
Volume control
on the front of the unit or press the volume control on the
remote to move to a new preset number and press
Select
to store the preset. The
display will briefly show that the station has been stored.
3. To load a stored preset, simply press the number on the remote control that
corresponds with the preset you wish to access. Use -/-- on the remote when loading
stored presets greater than 9.
Note:
Stored presets can be replaced by saving a new desired station into any preset.
Setting the clock
By default, the clock will set itself according to the clock data transmitted by SIRIUS,
DAB or RDS enabled FM broadcasts. If you are not in a region where you can receive
these transmissions, you can set the clock manually.
To set the clock time:
1. Press and hold the
Volume control
on the front of the unit to enter the advanced
settings menu.
2. Cycle through the different settings by pressing the
Volume control
or pressing the
volume control on the remote.
3. When 'Clock Aut' is displayed, rotate the
Volume control
or the volume control on the
remote to change the setting to 'Clock Man'. Press the
Volume control
or the volume
control on the remote to confirm your choice.
4. Change the hour by rotating the
Volume control
or pressing the volume control on
the remote. Press the
Volume control
or the
Menu
button on the remote to confirm,
and proceed to adjust the minutes in the same manner.
5. When you have finished setting the time, press the
Volume control
or the
Menu
button on the remote to return the unit to normal operation.