CAME MR8106 Installation Tips Manual - page 4
4
2
2
1
1
1
2
3
0
0
°
0
°
30
°
0
°
45
°
• To obtain a sensing field as close to the door as possible :
the tilt angle of the antenna must be set at the minimum position (0°)
• To obtain a sensing field close to the door :
the tilt angle of the antenna must be set at the position 30°
- Example of use with a very deep
operator
- Example of use with a normal
operator
B. THE POSITION OF THE SENSING FIELD IS DETERMINED BY THE VERTICAL TILT ANGLE OF
THE ANTENNA
• To obtain a sensing field far from the door :
the tilt angle of the antenna must be set at the maximum position (45°)
- Example of use with a normal
operator
Wide sensing field antenna with 3 elements
0°
20°
45°
DETECTION SENSING
FIELD ACCORDING TO
THE VERTICAL TILT
ANGLE OF THE
ANTENNA
The sensing fields here on
the right correspond to the
following adjustments :
• vertical angle of
antenna : 0°, 20°, 45°
• sensitivity : 9
Mounting height : 2.2 m