CAME MR8106 Installation Tips Manual - page 5
5
ENGLISH
0
°
–30
°
+30
°
0
°
70
°
2
2
1
1
1
2
3
0
2
6
9
2
1
1
1
2
3
0
1
+30
°
–30
°
2
2
1
1
1
2
3
0
0
3
6
8
9
2
2
1
1
1
2
3
0
• For ceiling mounting, the vertical tilt angle of the antenna
must be set at the maximum position of 70-75° and the
spherical part of the sensor must be oriented in the opposite
direction to the door
X
3-elements
antenna
6-elements antenna
DETECTION
SENSING FIELDS
FOR A
CEILING MOUNTING
The sensing fields here on
the right correspond to the
following adjustments :
• vertical angle of
antenna : 70°
• sensitivity : 9
Mounting height : 2.2 m
The sensing fields here on
the right correspond to the
following adjustments :
• wide sensing field
antenna
• lateral angle of
antenna : 30°, -30°
• sensitivity : 1, 6, 9
Mounting height : 2.2 m
C. THE LATERAL POSITION OF THE SENSING FIELD IN FRONT OF THE DOOR IS DETERMINED
BY THE LATERAL TILT ANGLE OF THE ANTENNA
The sensing fields here on
the right correspond to the
following adjustments :
• wide sensing field
antenna
• vertical angle of
antenna : 30°
Mounting height : 2.2 m
D. THE DIMENSIONS (WIDTH, DEPTH, DEAD ZONE) OF THE SENSING FIELD DEPEND ON THE
SENSITIVITY SETTING : SET BETWEEN 0 AND 9
The sensing fields here on
the right correspond to the
following adjustments :
• wide lsensing field
antenna
• vertical angle of
antenna : 20°
• sensitivity : 9
Mounting height : 3 m
E. THE DIMENSIONS (WIDTH, DEPTH, DEAD ZONE) OF THE SENSING FIELD DEPEND ON THE
MOUNTING HEIGHT