Camrivox Ltd. UTA-151 User Manual - page 6
UTA-151 User Manual
© Camrivox Ltd. 2006
Page 3 of 20
2.2. Voice Connect PC Application
2.2.1. Installation
Before using the UTA-151 you should install the Camrivox Voice Connect application on your
PC. This application helps to configure the UTA-151 and after installation offers Computer
Telephony Integration features (see section 4 for further information on CTI).
The Voice Connect application runs on any Microsoft Windows PC running the Microsoft
.NET 2.0 framework. Most modern PCs already come with .NET pre-installed but if missing,
it can be installed automatically during the installation process. To use the CamriVox UTA-
151 with operating systems other than Windows please refer to section 2.3.
To install the CamriVox Voice Connect application, simply insert the installation CD into your
PC’s CDROM drive. The installer should automatically run. If this is not the case, browse the
files on your computer in Windows Explorer, double-click on the CDROM drive, and run the
setup.bat
program manually.
When the Voice Connect installer runs, a window should appear to guide you through the
installation process. The installer comes with sensible default settings, so in most cases
repeatedly clicking on next should be sufficient. However, you may wish to override the
default settings if you choose.
After installation the Voice Connect application should appear in the bottom right of your
Windows desktop in the Windows tray icon area as follows:
2.2.2. Uninstall/removal
There are two ways to uninstall the Voice Connect application. You can insert the installation
CD a second time and a window will appear asking if you wish to remove the application.
Alternatively, the Voice Connect application can be removed by going to the Windows Control
Panel, going to Add/Remove programs and them removing Voice Connect.
2.3. Operating systems other than Windows
CamriVox products can be used on systems other than Windows, for example Linux or Apple
Macs. While the Voice Connect PC application will not be available, it is still possible to access
and configured the UTA-151 through a web browser.
To access the UTA-151 in this way you must first launch a Web Browser such as Firefox. Now
the URL of the UTA-151 must be entered. To discover the management URL pick up the
telephone attached to the UTA-151. After the message which starts “Entering failsafe mode
because Internet telephony is unconfigured….” press ‘#’ on the telephone. An audio message
will be played describing the URL that must be entered. Enter this URL into your web
browser and once at the management web page, follow the steps in section 2.5 for
configuration instructions.
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560