Can-Am DS 450 EFI X mx Operator's Manual - page 104
MAINTENANCE PROCEDURES
vmo2008-011-063_a
1. Lock nut
2. Turn cable adjuster until proper di-
mension is obtained.
vmo2008-011-063_b
1. Cable adjuster
vmo2008-011-063_c
CLUTCH LEVER — PROPER ADJUSTMENT
A. 10 to 15 mm
3. Tighten cable adjuster lock nut
when proper adjustment is ob-
tained.
Adjustment at Clutch Cover
NOTICE
When adjustment of the
clutch release cover screw is need-
ed, it means that the clutch plates
have worn. Therefore, it is strong-
ly recommended to take the vehicle
to an authorized Can-Am dealer for
clutch plates inspection.
1. Loosen cable adjuster lock nut.
2. Completely loosen clutch cable ad-
juster to provide maximum free
play.
vmo2008-011-064_b
TYPICAL
1. Cable adjuster
3. Remove clutch cover access plugs.
vmo2009-010-103_a
LH SIDE OF ENGINE
1. Access plugs
102
______________