Can-Am DS 450 EFI X mx Operator's Manual - Warning
TUNE YOUR RIDE
WARNING
Never unscrew wheel hub nut to
align one of its grooves with a cot-
ter pin hole.
9. Install a NEW cotter pin.
Track Width Spacer Arrangement
TRACK WIDTH SPACER
ARRANGEMENT
INNER
SIDE OF
HUB
OUTER
SIDE OF
HUB
TOTAL TRACK
WIDTH
0
4
117 cm
1
3
119.5 cm
2
2
122 cm
3
1
124.5 cm
4
0
127 cm
Front Suspension
Adjustments
Shock Absorber Adjustments
Spring Preload
Shorten the spring for a firmer ride and
rough trail condition.
Lengthen the spring for a softer ride
and smooth trail condition.
vmo2008-011-057_a
TYPICAL - PRELOAD ADJUSTMENT
Step 1: Loosen top locking ring
Step 2: Turn adjusting ring accordingly
Step 3: Tighten top locking ring
Lift the front of the vehicle. Spring
length should be measured without
load on the wheels.
vmo2008-011-056_a
TYPICAL - PRELOAD ADJUSTMENT
A. Same length
Low Speed Compression Damping
Use a flat screwdriver to adjust it.
_______________
75