Can-Am DS250 Operator's Manual - page 75
MAINTENANCE SCHEDULE
PERIODIC MAINTENANCE CHART
Initial inspection 10 h or 30 days or 200 km (125 mi)
25 h or 500 km (300 mi)
50 h or 1 000 km (600 mi)
100 h or 1 year or 2 000 km (1,200 mi)
200 h or 2 years or 4 000 km (2,500 mi)
A: Adjust
C: Clean
I: Inspect
L: Lubricate
R: Replace
To be performed by
PART/TASK
LEGEND
CVT TRANSMISSION
Drive belt
I
Dealer
Drive and driven pulleys
I, C
Dealer
CVT air inlet/outlet duct
I, C
I, C
Dealer
—
FUEL SYSTEM
Fuel filter
I
I
R
Dealer
Fuel lines, connections and fuel
tank leak test
I
I
Dealer
Carburetor
A
A
Dealer
Throttle lever
(1)
and cable
I, A
I, A,
L
Customer
Choke
I
I, A
Customer
(1) Pre-ride inspection item.
ELECTRICAL SYSTEM
Spark plug
(4)
I
R
Customer
Ignition timing
I
I
Dealer
Battery connections
I
I
Customer
Wiring harnesses, cables and
lines
I
I
Dealer
Ignition switch, engine start
button and engine stop switch
I
(1)
Customer
Lighting system (HI/LO intensity,
brake lamp, headlights aiming,
etc.)
I
(1)
Customer
(1) Pre-ride inspection item.
(4) Make sure the spark plug
is correctly gapped.
DRIVE SYSTEM
Drive chain and slider
(1)
I, A, L
Customer
Drive chain sprockets
I
I
Customer
Wheel bearings
I
Customer
(1) Pre-ride inspection item.
_______________
73