Cannondale Bicycle Owner's Manual - Part I

30

PaRt i

CoasteR BRakes

1.  how the coaster brake works

The coaster brake is a sealed mechanism which is a part of the bicycle’s rear wheel hub.  The brake is activated 

by reversing the rotation of the pedal cranks (indicated by arrow above).  Start with the pedal cranks in a nearly 

horizontal position, with the front pedal in about the 4 o’clock position, and apply downward foot pressure on 

the pedal that is to the rear. About 1/8 turn rotation will activate the brake. The more downward pressure you 

apply, the more braking force, up to the point where the rear wheel stops rotating and begins to skid.

WaRninG

Before riding, make sure that the brake is working properly.  If it is not working properly, have the bicycle 

checked by your dealer before you ride it.

WaRninG

If your bike has only a coaster brake, ride conservatively. A single rear brake does not have the stopping 

power of front-and-rear brake systems.

2.  adjusting your coaster brake

Coaster  brake  service  and  adjustment  requires  special  tools  and  special  knowledge.    Do  not  attempt  to 

disassemble or service your coaster brake. Take the bicycle to your dealer for coaster brake service.