Canon i-SENSYS D450d Service Manual - page 115
Chapter 9
9-3
9.3.4 Left Cover
9.3.4.1 Removing the Left Cover
0020-2728
i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Remove the front over.(page 9-2)Reference[Removing the Front Cover]
2) Close the printer cover [1].
3) Disengage the claw to remove the holder [2].
F-9-8
4) Remove from the damper rail while picking the damper [1]
F-9-9
5) Remove the 4 screws [2] to remove the damper [1].
F-9-10
6) Remove the damper stopper [3].
- 1 screw [1]
- 1 claw [2]
F-9-11
7) Remove the damper rail [3].
-2 screws [1]
-1 claw [2]
F-9-12
8) Open the printer cover [1].
9) Remove the 5 claws [2] to detach the left cover [3].
[2]
[1]
[1]
[1]
[2]
[2]
The scanner unit cannot be secured if the damper is removed. Be careful not
to get your hands caught because you have to perform the work with the
control panel open from now onward.
[1]
[2]
[3]
[1]
[1]
[2]
[3]