Canon i-SENSYS D450d Service Manual - page 61
Chapter 4
4-9
F-4-23
5) Remove the 2 claws [1] to detach the ADF motor cover [2].
F-4-24
6) Remove the ADF motor [3].
- 2 screws [1]
- 1 cable tube [2]
F-4-25
4.3.2.3 Removing the DADF Motor
0020-2680
i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Open the copyboard cover unit [1] and remove it in an upward direction.
Remove the left-side hinge [2] while lifting it down to the backside.
F-4-26
2) Reverse the copyboard [1] and remove the bottom cover [4].
- 1 screw [2]
- 5 claws [3]
F-4-27
3) Remove the cable [2] from the cable guide [1].
F-4-28
4) Remove the cover [1] in the direction shown by an arrow.
- 1 hook [2]
Place the removed copyboard cover unit on a cloth, etc. so that the bottom
sheet is not damaged.
[2]
[1]
[1]
[2]
[1]
[3]
[2]