Canon i-SENSYS D450d Service Manual - page 46
of
182
Chapter 3
3-4
F-3-6
2) Reverse the copyboard [1] and detach the bottom cover [4].
In the case of ADF
- 2 screws [2]
- 5 claws [3]
F-3-7
In the case of DADF
- 1 screws [2]
- 5 claws [3]
F-3-8
3) Free the cable [1] from the cable guide [2].
In the case of ADF
F-3-9
In the case of DADF
F-3-10
4) Remove the 4 screws and the 2 claws at the back of the control panel unit.
F-3-11
5) Reverse the copyboard [1] again.
6) Remove the flat cable [2] to remove the control panel unit [3].
F-3-12
5) Reverse the copyboard [1] again.
[1]
[3]
[3]
[4]
[2]
[3]
[1]
[2]
[2]
[1]
[1]
[3]
[1]
[2]