Canon imageCLASS MF3111 Service Manual - page 112
Manual is about: Service Manual
of
176
Chapter 3
ޓ
3-64
3.6.1.11
Removing the Power
Supply Shield Plate
0007-7748
1) Remove the 5 screws [1] to remove the power
supply shield plate [2].
F-3-255
3.6.1.12
Removing the Fixing
Film Unit
0007-7749
1) Remove the 2 screws [1] and take off the Fixing
cover [2].
F-3-256
2) Remove the 2 screws [1]. Remove the Fixing entrance
guide [2] by sliding it sideways back and forth.
F-3-257
3) Disengage the connector [1] of the power supply
board.
4) Remove the grounding springs and the pressure
springs [2] on both sides.
5) Remove the pressure plates [3] on both sides.
F-3-258
[1]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[2]
[2]
[3]