Canon imageCLASS MF3111 Service Manual - page 92
Manual is about: Service Manual
of
176
Chapter 3
ޓ
3-44
3.5.2.6
Removing the Scanner
Unit
0007-7827
1) Remove the connector [1] and the flat cable [2] on
the ECNT board, and remove the screw [3].
(Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the
right and left sides.
F-3-172
3) Remove the 2 screws on the back [1]. Slide the
scanner unit [2] to the back; then, remove it by
lifting it.
F-3-173
3.5.2.7
Removing the Top Cover
0007-7828
1) Remove the 2 screws [1], and remove the Top cover [2].
F-3-174
3.5.2.8
Removing the Right
Frame
0007-7829
1) Remove the 3 screws [1], and remove the right
frame [2].
F-3-175
[2]
[4]
[3]
[1]
[5]
[1]
[2]
[2]
[1]
[2]
[1]
[1]