Concept Pro VXM4-RT16 User Manual - page 17
14
CONFIGURING THE VXM4
CONFIGURING THE VXM4
CAMERA : PTZ
Additional properties such as pan / tilt and zoom speed can also be defined for each channel
by clicking the PARAM button.
Note that some settings, such as AUTO FOCUS, may not be compatible with particular PTZ
equipment. If this is the case, changing this value will have no effect on PTZ control
CAMERA : COVERT / OSD
Individual cameras can be set to COVERT mode. When a particular camera is set to
COVERT, the image continues to be recorded but is not displayed in live view mode.
MAIN DISPLAY OSD
TITLE: When ticked, camera titles are displayed
STATUS: When ticked, recording status for each channel is displayed
TIME: When ticked, time and date is displayed
BORDER LINE: The border colour for multi screen display can be changed from this drop
down box
GUI ALPHA: During menu setup, the live view can be seen behind the menu screen.
Changing this value determines whether the live is more (lower value) or less (higher value)
visible
MOTION SENSOR DISPLAY: If false motion recording is occurring, the operator can use
this feature to detect and rectify the cause in realtime. When motion sensor display is
enabled, if active area is selected, coloured blocks show areas of motion in normal live
display. If inactive area is selected, coloured blocks show areas of inactivity in normal live
display
SPOT OSD:
TITLE: When ticked, camera titles are displayed
STATUS: When ticked, recording status for each channel is displayed
TIME: When ticked, time and date is displayed
OSD COLOUR: The on screen display text colour can be changed from this drop down box